Default welcome msg!

Default welcome msg!

DTECH RS232 to RS485 Converter Serial Adapter with 4 Position Terminal Block for Long Haul Data Communication Supports 600W Anti-Surge - BUB3G293F

  • SKU: BUB3G293F
  • Availability: In Stock
$70.08 $19.50

This fits your .

  • Make sure this fits by entering your model number.

  • Port powered RS232 to RS485 Converter used in Long-haul Communication up to 4000ft (1200 meters)

  • RS232 to RS485 adapter enables the connections of multiple bus nodes and 32 devices can be joined in RS-485 network

  • Automatic RX - TX Control; RS-232 to RS-485 Converter controls the “Receive” and “Transmit” modes automatically

  • Up to 115.2kbps baud rate (auto-detect) can be applied to point to point two wire half duplex and point to multi-point two wire half duplex communication

  • A built-in Transient Voltage Suppressor (TVS) supports 600W anti-surge protection on each line of RS485 link which effectively guard devices from damage

  • RS-232 to RS-485 converters are mostly used in industrial and commercial environments. The reason is that the RS485 converter can be used for multi-drop networks, meaning that you for example can connect multiple RS485 devices to one computer. Up to 32 devices can be connected in one network to communicate on a single pair of wires (plus a ground wire). This type of communication is called half-duplex communication. Most quality RS485 converters can communicate in this manner of up to 4000 feet (1200 meters). RS232 to RS485 serial converter is also fairly resistant to noise which is one more reason why it is favored in industrial environments.

    Guard Your Value Equipment
    A built-in transient voltage suppressor (TVS) supports 600W anti-surge, effectively guard your value devices from the hazards of transient surges, lightning.

    No Driver Required
    Auto control data flow direction of I/O circuit feature makes it fully plug-and-play.

    Port-Power
    No external power supply required, it is port-powered from RS232 data lines and low consumption electricity.

    Mini-Size with 2 screws and terminal block

    Specific

    Standard: EIA/TIA RS232C / RS485
    Baud Rate: 300bps - 115.2kbps
    Working Mode: 2 wire asynchronous half-duplex
    Communication Mode: Point to Point, Point to Multipoint
    Transmission Media: Twisted Pair (Wire diameter >= 0.5mm) or Shielded wire
    Transmission Distance: RS232 Interface: up to 50ft (15m); RS485 Interface: up to 4000ft (1.2km)
    Surge Protection: RS485 Interface, Each wire 600W

    Original Packing Included

    1 X DTECH RS232 to RS485 Converter

    DTECH RS232 to RS485 Converter Serial Adapter with 4 Position Terminal Block for Long Haul Data Communication Supports 600W Anti-Surge - BUB3G293F

    Copyright © aquivaelnombre.com . 2022 All rights reserved.